Version_1.0 JK_Plates analyzed using the 2-flips method and the JK_Plate_final_parameter_database generated by hand. Version_2.0 JK_Plates analyzed using the 6-rotations method and the JK_Plate_final_parameter_database generated by hand. Version_3.0 JK_Plates analyzed using the 6-rotations method and the JK_Plate_final_parameter_database generated automatically using the latest calibration data for each plate. The following plates were found to be different. J0009 different by {0.000,-0.004, 0.004,0.000,-0.005, 0.002} J0202 different by {0.000,-0.011,-0.008,0.000, 0.001, 0.017} K0286 different by {0.000,-0.015, 0.023,0.000,-0.068,-0.061} used in V0183 source K0354 different by {0.000, 0.000,-0.096,0.000, 0.078, 0.065} used in U0129 source The latest version generated an out of tolerance sigma for U0183 source. Most likely the latest calibration of the K0286 plate was bad and the earlier calibration will be used (changes will be reflected in the Version_4.0 files). Version_4.0 JK_Plates analyzed using the 6-rotations method and the JK_Plate_final_parameter_database generated automatically using the latest calibration data for each plate (the latest calibration for K0286 was discarded). Version 5.0 The data was recalculated using a newer stage measurement (from July 2006 vs from March 2005)